Liquid Chromatography-Mass Spectrometry Specifications
Liquid Chromatography-Mass Spectrometry
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
  • Acetic Acid SpR

    HA016
    100ml HA016S
    500ml HA016P
    1LT HA016M
    Dgr H:226-314
    P:280c-301+330+331-305+351+338-307+310
    (Acetic Acid glacial)
    CH3COOH MW 60.05 FP 16.7°C BP 117.9°C d 1.05 CAS [64-19-7]
    Assay >99.8% Water <0.1% Residue <0.0001%
    UV: 252nm >10%; 260nm >50%; 270nm >80%; 280nm >95%; 300-400nm >99%
    Fluorescence (0.1% aqueous, as quinine): 254nm <1 ppb; 365nm <1 ppb
    Suitability for HPLC passes test
    Suitability for LC-MS passes test
    Trace ionic impurities (0.1% aqueous):
    Ag, Cu, Fe, K, Mg, Mn, Ni, Pb, Zn <10 ppb each
    Al, Ca <25 ppb each
    Na <50 ppb
    Application: HPLC as buffer reagent, LC-MS as additive
    100ml HA016S
    500ml HA016P
    1LT HA016M
    Dgr H:226-314
    P:280c-301+330+331-305+351+338-307+310
  • Acetonitrile UpS

    ultra lc
    H050
    1LT H050M
    2½LT H050L
    Dgr H:225-302+312+332-319
    P:210-240-302+352-305+351+338-403+233
    (Methyl Cyanide)
    CH3CN MW 41.05 BP 81.6°C d 0.78 CAS [75-05-8]
    Assay >99.9% Water <0.005% Residue <0.0001%
    UV: 190nm >18%; 193nm >50%; 197nm >80%; 215nm >95%; 230-400nm >99%
    Acidity <0.0005 meq/g
    Alkalinity <0.00006 meq/g
    Gradient Use Test: 205nm <0.002 AU; 254nm <0.0005 AU
    Baseline drift <0.02 AU @ 205nm
    Fluorescence (as quinine): 254nm <1 ppb; 365nm <1 ppb
    Suitability for LC-MS passes test
    Trace ionic impurities:
    Ag, Cu, Fe, K, Mg, Mn, Ni, Pb, Zn <10 ppb each
    Al, Ca <25 ppb each
    Na <50 ppb
    Application: HPLC critical gradient applications, LC-MS, UHPLC
    1LT H050M
    2½LT H050L
    Dgr H:225-302+312+332-319
    P:210-240-302+352-305+351+338-403+233
  • Acetonitrile UpS

    ultra pfas
    H052
    1LT H052M
    2½LT H052L
    Dgr H:225-302+312+332-319
    P:210-240-302+352-305+351+338-403+233
    (Methyl Cyanide)
    CH3CN MW 41.05 BP 81.6°C d 0.78 CAS [75-05-8]
    Assay >99.9% Water <0.005% Residue <0.0001%
    UV: 190nm >18%; 193nm >50%; 197nm >80%; 215nm >95%; 230-400nm >99%
    Acidity <0.0005 meq/g
    Alkalinity <0.00006 meq/g
    Gradient Use Test: 205nm <0.002 AU; 254nm <0.0005 AU
    Baseline drift <0.02 AU @ 205nm
    Fluorescence (as quinine): 254nm <1 ppb; 365nm <1 ppb
    Suitability for LC-MS passes test
    Trace ionic impurities:
    Ag, Cu, Fe, K, Mg, Mn, Ni, Pb, Zn <10 ppb each
    Al, Ca <25 ppb each
    Na <50 ppb
    Suitability for PFAS analysis passes test
    Application: Ultra low background solvent for LC-MS analysis of poly- and per-fluoroalkyl substances
    1LT H052M
    2½LT H052L
    Dgr H:225-302+312+332-319
    P:210-240-302+352-305+351+338-403+233
  • Ammonia solution SpR

    HB059
    50ml HB059T
    100ml HB059S
    Dgr H:314-335
    P:280c-301+330+331-304+340-305+351+338-309+310
    (Ammonium Hydroxide solution)
    NH3 MW 17.03 d 0.92 CAS [1336-21-6]
    Assay 20-22% Residue <0.0002%
    UV (0.1% aqueous): 225nm >20%; 235nm >50%; 240nm >80%; 250nm >95%; 260-400nm >99%
    Fluorescence (0.1% aqueous, as quinine): 254nm <1 ppb; 365nm <1 ppb
    Suitability for HPLC passes test
    Suitability for LC-MS passes test
    Trace ionic impurities (0.1% aqueous):
    Ag, Cu, Fe, K, Mg, Mn, Ni, Pb, Zn <10 ppb each
    Al, Ca <25 ppb each
    Na <50 ppb
    Application: HPLC as buffer reagent, LC-MS as additive
    Elemental impurities specified at time of manufacture.
    50ml HB059T
    100ml HB059S
    Dgr H:314-335
    P:280c-301+330+331-304+340-305+351+338-309+310
  • Ammonium Acetate SpR

    HR079
    100g HR079S
    500g HR079P
    CH3COONH4 MW 77.08 CAS [631-61-8]
    Assay >99%*
    UV (0.1% aqueous): 210nm >10%; 220nm >50%; 230nm >80%; 235nm >95%; 245-400nm >99%
    *on anhydrous substance
    Fluorescence (0.1% aqueous, as quinine): 254nm <1 ppb; 365nm <1 ppb
    Suitability for HPLC passes test
    Suitability for LC-MS passes test
    Chloride <0.0005%
    Sulphate <0.001%
    Nitrate <0.001%
    Trace ionic impurities (0.1% aqueous):
    Ag, Cu, Fe, K, Mg, Mn, Ni, Pb, Zn <10 ppb each
    Al, Ca <25 ppb each
    Na <50 ppb
    Deliquescent, hygroscopic. Replace cap promptly after use.
    Application: HPLC as buffer reagent, LC-MS as additive
    100g HR079S
    500g HR079P
  • Ammonium Fluoride SpR

    HR453
    100g HR453S
    500g HR453P
    Dgr H:301+311+331
    P:261-280d-301+310-302+352-304+340-311
    NH4F MW 37.04 d 1.01 CAS [12125-01-8]
    Assay >98%
    UV (0.1% aqueous): 215nm >10%; 225nm >50%; 230nm >80%; 240nm >95%; 245-400nm >99%
    Fluorescence (0.1% aqueous, as quinine): 254nm <1 ppb; 365nm <1 ppb
    Suitability for HPLC passes test
    Suitability for LC-MS passes test
    Chloride <0.001%
    Sulphate <0.005%
    Trace ionic impurities (0.1% aqueous):
    Ag, Cu, Fe, K, Mg, Mn, Ni, Pb, Zn <10 ppb each
    Al, Ca <25 ppb each
    Na <50 ppb
    Deliquescent, hygroscopic. Replace cap promptly after use.
    Application: HPLC as buffer reagent, LC-MS as additive
    100g HR453S
    500g HR453P
    Dgr H:301+311+331
    P:261-280d-301+310-302+352-304+340-311
  • Ammonium Formate SpR

    HR305
    100g HR305S
    500g HR305P
    Wng H:315-319-335
    P:261d-305+351+338
    HCOONH4 MW 63.06 d 1.26 CAS [540-69-2]
    Assay >98%
    UV (0.1% aqueous): 215nm >10%; 225nm >50%; 230nm >80%; 240nm >95%; 245-400nm >99%
    Fluorescence (0.1% aqueous, as quinine): 254nm <1 ppb; 365nm <1 ppb
    Suitability for HPLC passes test
    Suitability for LC-MS passes test
    Chloride <0.0005%
    Sulphate <0.005%
    Trace ionic impurities (0.1% aqueous):
    Ag, Cu, Fe, K, Mg, Mn, Ni, Pb, Zn <10 ppb each
    Al, Ca <25 ppb each
    Na <50 ppb
    Deliquescent, hygroscopic. Replace cap promptly after use.
    Application: HPLC as buffer reagent, LC-MS as additive
    100g HR305S
    500g HR305P
    Wng H:315-319-335
    P:261d-305+351+338